You don’t get any better than this. A stunning limited edition panel only 450 made world wide and this customer took three.
We believe this is as good as it gets.
Very high security “winkhaus” locks.
Installed Barry 2005

Stunning real beveled door. Individual hand cut panes of glass, leaded soldered and polished then  inserted into centre of double glazed unit.
Result a triple glazed unit of unbelievable quality and value for money.
Pale  blue in colour.
Installed Barry 2005
Stunning real beveled door. Individual hand cut panes of glass, leaded soldered and polished then  inserted into centre of double glazed unit.
Result a triple glazed unit of unbelievable quality and value for money.
Pale  blue in colour.
Installed Barry 2005
Superb beveled door, windows and canopy all fitted by ourselves.
Installed Barry 2004 and we first fitted windows for this customer over ten years ago.
Stunning beveled door installed at the “CASO PACO restaurant in Barry.
We first worked for the owners over fifteen years ago and they always come to us.
If you want the finest food available in Barry, in our opinion they don’t get any better than this restaurant.
Why not try them there number is 01446-
Installed Barry 2005
Another stunning door and matching side panel.
Real beveled glass.
Installed Barry 2005
Popular design for many rear doors.
Installed Barry 2005
Traditional real leaded door designed for customer
Installed Barry 2002
Stunning property where we have installed the windows doors and front door canopy.
We have been installing our products for these customers for over ten years.
Traditional design light oak door.
Installed Barry 2003
Door with beveled side panels.
Installed Barry 2002
Rosewood door with real beveled glass.
Installed in Sully in 2004
This door is popular for front and back.
Installed Barry 2001
Arched doors with  Etched glass.
Installed Barry 2001
Stunning door and side panel to compliment our windows.
All fascia soffit and guttering replaced at same time.
Stunning transformation of house.
Installed Barry 2005
Typical back door design
Installed Barry 2006
Rational lead work in this Victorian style door.
Installed Barry 1997
Stunning door and side panels with beveled glass.
Installed Barry 2002
Panel door designed by customer with Georgian side panels
Installed Barry 1999

Scorpion Door Locks

The Scorpion™ Multi-Point Lock has been designed specifically for the latest designs of PVCu doors and not only incorporates very high security levels but at the same time has very low operating forces to ensure that the operation of the mechanism is as smooth as possible.
This ease of use is especially important
for the elderly and infirm.

Key Features:

  • Enhanced gearbox design with the very latest security and low operating force features
  • Massive 38m wide tensile steel keeps for increased security
  • Tri-laminate steel ‘anti-lift’ centre hook
  • Tensile steel opposing pincer hooks
  • Unique hand adjustable compression cams2 for operating force and weatherseal compression ‘fine-tuning’
  • Solid steel 8mm diameter Shootbolts for smooth, snag free action in French Doors
  • Stable door, Arched/raked head and all round locking option.
  • New all ‘silver’ corrosion resistant finish
  • 10 Year warranty as standard plus House Insurance excess compensation in the unlikely event of a successful forced entry*

WWS Disclaimer
Sometimes due to circumstances beyond our control a different make of lock may have to be used. However it will be as good as the locks shown above.

Specifications

Each Door Cylinder unit is supplied with two Keys plus a Coded Key Card.

Increased Security

The high security coded card supplied with the lock must be kept safe in order to cut new keys.
If a key is lost, a new one can only be cut on presentation of the coded key card.

Other benefits

  • You can have other locks keyed alike to use the same key. This reduces the amount of keys carried.
  • Master keying is also available for Flats, Schools and Business Premises etc.
  • You can also have the normal Yale type lock to match.
  • High security padlocks are available once again all working using the same key.

Costs

A 40/55 Door Cylinder unit with two keys, plus Coded Key Card Costs £39.95 plus fitting
Additional keys are £7 each.
Keyed alike cylinders and keys that operate additional locks, extra.

OUR OFFER

Door Cylinder Unit with 2 keys.
Plus Coded Key Card  – £39.95
Plus a 3rd key FREE of CHARGE
(See details below for fitting)

Fitting for the following areas
Barry  – £30 for the first cylinder and £20 for each thereafter.
Rhoose, Llantwit Major, Penarth and Dinas Powis  – £40 for the first cylinder and £20 each.
Cardiff, Llantriscant  – £45 for the first cylinder and £20 each.

Doors originally fitted by WWS locally, will be fitted at a reduced cost of £50 per cylinder.

For maximum efficiency these cylinders must be correctly measured and fitted by professionals installers.

Located in the fabric of the door the ArmourShield device shroud’s the locking cylinder and protects it from attack from crowbars and large screw drivers!

  • If the handle is forcibly removed from the exterior of the door the ArmourShield helps prevent the potential intruder from snapping the locking cylinder and gaming entry to the property.
  • When fitted the ArmourShield is completely concealed within the base plate of the handle.
  • Ideally suitable for Winkhaus Palladio XL handles but will also fit Hoppe Tokyo Door handles.
  • Handle bolts through the ArmourShield for enhanced security.
  • Complies with the latest Police ‘Secured by design’ Guidelines.
  • Tested in accordance with A7 Heavy duty tools as specified in PAS24:A.7 security standard.
  • Can be fitted to new and existing doors. For door routing details see reverse.
  • Two sizes available depending on door thickness.

    1611488 Armourshield (Ext cyl.<45mm) for doors where the cylinder measures less than 45mm to the outside (measured from the centre line.) i.e. would be used on a cylinder size 35/35.

    1611490 Armourshield (Ext cyl.>46mm) for doors where the cylinder measures more than 46mm to the outside (measured from the centre line). i.e would be used on a cylinder size 35/50.

  • For optimum performance tighten the M5 x 8mm grub screw. (Note: If using a thumbturn cylinder on some PVCu profiles it will be necessary to increase the length of the cylinder on the inside by 10mm, to allow access to the grub screw).